Do it yourself
| ||||
|
Ford Bronco Sport - Video tutorial
Model: Ford Bronco Sport
Cx430
- Years 2021-2024 In today's video tutorial we will see how to remove the rear door panel, in order to replace the loudspeaker of the Ford Bronco Sport. First we open the rear door and start removing the various plastic covers, also removing the window lifter button; then disconnect the electrical connector and unscrew the fixing screws that we find below and on the sides of the panel itself, as shown in the video. At this point we pry to release and remove the panel, later replacing the speaker, following the video to the end!
Posted on 5 May 2024 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.022
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |