Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Taillights on a Ford Bronco Sport?

Model: Ford Bronco Sport Cx430 - Years 2021-2026
Part: Tail light

In this tutorial, see how to remove the taillights on a Ford Bronco Sport, a very simple and quick operation to perform if you need to replace a bulb. First, ensure the key is not in the ignition, then open the tailgate and unclip the plastic cover along the inner edge of the light to be removed. Once done, unscrew the two bolts using a 10mm wrench, grasp the light assembly, and pull it towards you to remove it from the body. Finally, proceed with replacing the damaged component.

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Interior Fuse Box of the 2021 Ford Bronco Sport
Where to Find the Interior Fuse Box of the 2021 Ford Bronco Sport
Ford Bronco Sport (2021-2026 / Cx430) In this new guide dedicated to the 2021 Ford Bronco Sport, discover where the interior fuse box is located. Fortunately, it will only take a few seco…
How to Reset the Oil Light on the Ford Bronco Sport
How to Reset the Oil Light on the Ford Bronco Sport
Ford Bronco Sport (2021-2026 / Cx430) If you have just changed the oil and the respective filter in your new Ford Bronco Sport, you must reset the oil warning light to prevent it from tur…
How to Reset the Oil Light on the Ford Bronco Sport
How to Reset the Oil Light on the Ford Bronco Sport
Ford Bronco Sport (2021-2026 / Cx430) To manually reset the oil light on your Ford Bronco Sport, follow the steps outlined in this guide. Fortunately, the procedure is very simple and tak…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos