Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Position Lights on a Ford Focus?

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Headlight bulb

Replacing the position lights on the Ford Focus MK2 is a straightforward task. First, remove the headlamp by unscrewing the two upper fixing screws. Once done, open the rubber rear cap located at the end of the headlamp, and using long pliers, grasp the bulb holder and turn it clockwise to detach it from its seat. Pull it out and remove the bulb by simply sliding it out. Insert the replacement bulb, model W3W, and reassemble everything by following the reverse procedure. Remember to test the correct operation of the replacement first.

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Focus (2004-2011 / MK 2, Focus 2) In this brief guide, you will learn the main instructions to adjust the handbrake lever on a Ford Focus. First, get inside the vehicle and remove the…
Ford Focus (1998-2004 / MK 1) Before you start, open the bonnet of your Ford Focus. Begin by unscrewing and removing the screws and bolts located around the perimeter of the bumpe…
Ford Focus (2011-2018 / MK 3) In this new guide dedicated to all of you who own a Ford Focus Mk3, we will describe all the necessary steps to replace the cabin air filter on your …

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos