Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to replace the rear lights of the Ford Focus

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Rear light bulb
Operation: How to replace the rear lights of the Ford Focus

In this video we will see how to replace the rear light bulbs of the second series of the C-segment of Ford, or the Focus. We proceed by opening the hatch, then unhook the strings of the parcel shelf. Now we unscrew the fasteners that hold the headlights in place and remove the latter, disconnecting the power connectors. We can now replace the burned out light bulbs. We find the stop and position lights and the arrows. Once this is done, before proceeding with the reassembly we check if the lights are working. As you have seen, this is a simple and fast operation, within everyone's reach.


Posted on 21 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Focus 2011-2018 - Why does the Ford Focus 3 brake light not work? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos