Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Lights on the Ford Focus?

Model: Ford Focus MK 1 - Years 1998-2004
Part: Tail light

In this tutorial, you will see how to remove the rear lights on the Ford Focus, an extremely simple and quick operation, for example, if you need to replace a bulb or the entire unit. First, open the boot lid, then undo the screw located on the inner edge of the light in question. Next, remove the rear cover, unscrew the large plastic nut, and separate the light from the bodywork by pulling it outwards. At this point, disconnect the power connector and replace the damaged unit.

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear headlight of the Ford Focus
How to disassemble the rear headlight of the Ford Focus
Ford Focus (1998-2004 / MK 1) If you want to disassemble one of the two rear lights of your Ford Focus by yourself, all you have to do is read the following guide carefully and fo…
How to Replace the Rear Lights on a Ford Focus
How to Replace the Rear Lights on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this video, you will learn how to replace the bulbs of the rear lights on the second series of Ford's C segment, the Focus. Start by opening the b…
How to install the front fog lights of the Ford Focus
How to install the front fog lights of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) These short and simple instructions will show us how to install the front fog lights of the Ford Focus. First of all, let's move to the front and sta…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos