Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear lights on the Ford Focus?

Model: Ford Focus MK 3 - Years 2011-2018
Part: Tail light

In this tutorial, we can see how to replace the rear lights in the Ford Focus, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely, then open the rear hatch and remove the panel located on the back of the headlight in question. Next, unscrew the plastic nuts indicated, grab the headlight and separate it from the body by pulling it outward. At this point, all that remains is to disconnect the power connector, replace the faulty element, and reassemble everything following the reverse procedure.

Posted on 24 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Lights on a Ford Focus
How to Replace the Rear Lights on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this video, you will learn how to replace the bulbs of the rear lights on the second series of Ford's C segment, the Focus. Start by opening the b…
How to Remove the Rear Bumper of the Ford Focus
How to Remove the Rear Bumper of the Ford Focus
Ford Focus (2011-2018 / MK 3) Today, in this video tutorial, learn how to remove and replace the rear bumper of the Ford Focus by following these simple and quick steps. First, mo…
How to Remove the Rear Lights on the Ford Focus?
How to Remove the Rear Lights on the Ford Focus?
Ford Focus (1998-2004 / MK 1) In this tutorial, you will see how to remove the rear lights on the Ford Focus, an extremely simple and quick operation, for example, if you need to …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos