Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear turn signal bulb of the Ford Focus.

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light bulb

See other generations:
Video tutorial

Today's instructions will show us how to disassemble and replace the rear turn signal bulb of the Ford Focus, as well as the other brake lights. First, let's open the rear hatch of the trunk and start unscrewing the plastic screw of the light fixture that we find inside; then we disconnect the electrical connector of the lights, thus removing the light from the outside.

At this point, we separate the bulb holder from the light fixture, removing and replacing the turn signal light (which has the same fitting); if necessary, we also replace the other lights, finally reassembling the rear light!


Posted on 25 November 2025 by ScegliAuto


Related tutorials

How to Change the Rear Indicator Bulb of the Ford Focus
How to Change the Rear Indicator Bulb of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In today's tutorial, learn how to remove and replace the rear indicator bulb of the Ford Focus in simple and quick steps. First, open the rear hatch …
How to Replace the Front Indicator Bulb on a Ford Focus?
How to Replace the Front Indicator Bulb on a Ford Focus?
Ford Focus (1998-2004 / MK 1) To replace the front indicator bulb on a Ford Focus, lift the car using a jack or ramp. This will allow access to the underside, directly in front of…
How to Remove the Interior Light on a Ford Focus
How to Remove the Interior Light on a Ford Focus
Ford Focus (1998-2004 / MK 1) In this video, learn how to change the bulbs in the interior light of a Ford Focus. Use a screwdriver to pry between the interior light and the headl…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos