Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Indicator Bulb of the Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Tail light bulb

In today's tutorial, learn how to remove and replace the rear indicator bulb of the Ford Focus in simple and quick steps. First, open the rear hatch of the boot and start by unscrewing the screws on the sides of the lamp; then remove the rear light and disconnect the bulb connector, as shown in the video. Next, separate the bulb holder from the housing to access all the bulbs; remove the indicator light and replace it with the new one of the correct type, finally reassembling everything!

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Indicator Bulb of the Ford Focus Wing Mirror
How to Change the Indicator Bulb of the Ford Focus Wing Mirror
Ford Focus (2011-2018 / MK 3) In this brief guide, discover the main steps to disassemble and replace the indicator bulb of the external wing mirror of the Ford Focus. First, remo…
How to Replace the Front Indicator Bulb on a Ford Focus?
How to Replace the Front Indicator Bulb on a Ford Focus?
Ford Focus (1998-2004 / MK 1) To replace the front indicator bulb on a Ford Focus, lift the car using a jack or ramp. This will allow access to the underside, directly in front of…
How to Replace the Indicator Bulb in a Ford Focus Wing Mirror
How to Replace the Indicator Bulb in a Ford Focus Wing Mirror
Ford Focus (2004-2011 / MK 2, Focus 2) How to replace the side indicator located in the external mirror of a Ford Focus? Proceed as follows: using a lever with a plastic or rubber coating,…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos