Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the turn signal bulb of the Ford Focus rearview mirror

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Light bulb

Today's step-by-step instructions will show us how to disassemble and replace the turn signal bulb of the external rearview mirror of the Ford Focus. First, let's move to the outside of the car and start by prying on the side of the plastic cover of the mirror to remove it; then disconnect the bulb socket of the turn signal, as before. At this point, remove the bulb from the socket, replacing it with the new original one; replace the entire bulb socket if necessary, finally reassembling the mirror cover!

Posted on 23 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the turn signal bulb in the Ford Focus side mirror
Replacement of the turn signal bulb in the Ford Focus side mirror
Ford Focus (2011-2018 / MK 3) Today we will see step-by-step instructions on how to disassemble and replace the side turn signal bulb of the external rearview mirror of the Ford F…
Replacing the Mirror Bulb on a Ford Focus
Replacing the Mirror Bulb on a Ford Focus
Ford Focus (2011-2018 / MK 3) Today, you will learn how to remove and replace the bulb of the external rear-view mirror on a third-generation Ford Focus. First, tilt the mirror fo…
Removing the mirror cap of the Ford Focus
Removing the mirror cap of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this video tutorial, you will learn how to remove and replace the cap of the external rear-view mirror, allowing you to replace the side indicator…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos