Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Indicator Bulb in the Wing Mirror of a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Side marker bulb

Using a small flathead screwdriver and leveraging it, start by prising off the cover of the wing mirror on your Ford Focus. Once done, you can detach the indicator light from the mirror. At this point, extract the bulb from the indicator light, and then disconnect the relevant connector. Once you have completed this step, the disassembly will be finished. To install the new bulb and close everything up, simply reverse these few and easy steps, and the replacement will be complete.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Indicator Bulb of the Ford Focus Wing Mirror
How to Change the Indicator Bulb of the Ford Focus Wing Mirror
Ford Focus (2011-2018 / MK 3) In this brief guide, discover the main steps to disassemble and replace the indicator bulb of the external wing mirror of the Ford Focus. First, remo…
How to replace the turn signal bulb of the Ford Focus rearview mirror
How to replace the turn signal bulb of the Ford Focus rearview mirror
Ford Focus (2004-2011 / MK 2, Focus 2) Today's step-by-step instructions will show us how to disassemble and replace the turn signal bulb of the external rearview mirror of the Ford Focus.…
Removing the mirror cap of the Ford Focus
Removing the mirror cap of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this video tutorial, you will learn how to remove and replace the cap of the external rear-view mirror, allowing you to replace the side indicator…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos