Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Mirror Bulb on a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Side mirror

Do you want to replace the bulb in the mirror? This task is not difficult; here's how to do it. Adjust the mirror or remove it by prising it off. Remove the cover cap and prise inside the indicator housing until it detaches from the mirror. Replace the damaged bulbs with identical ones in size and voltage. Once the replacement is complete, refit the indicator in the mirror along with the cover cap. Turn on the instrument panel and test the functionality of the indicator light on the external mirror.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Indicator Bulb in a Ford Focus Wing Mirror
How to Replace the Indicator Bulb in a Ford Focus Wing Mirror
Ford Focus (2004-2011 / MK 2, Focus 2) How to replace the side indicator located in the external mirror of a Ford Focus? Proceed as follows: using a lever with a plastic or rubber coating,…
How to Replace the Indicator Bulb in the Wing Mirror of a Ford Focus
How to Replace the Indicator Bulb in the Wing Mirror of a Ford Focus
Ford Focus (2011-2018 / MK 3) Using a small flathead screwdriver and leveraging it, start by prising off the cover of the wing mirror on your Ford Focus. Once done, you can detach…
How to Replace the Bulb in the External Mirror of a Ford Focus
How to Replace the Bulb in the External Mirror of a Ford Focus
Ford Focus (2011-2018 / MK 3) Start by positioning the mirror all the way down to open a gap at the top of the mirror on your Ford Focus. Then, pull the mirror out from that gap, …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos