Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of the Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Rear bumper

Today, in this video tutorial, learn how to remove and replace the rear bumper of the Ford Focus by following these simple and quick steps. First, move to the rear and open the boot; then, remove the rear lights by unscrewing the plastic screws and disconnecting the electrical connectors of the bulbs. Next, unscrew the screws found on the housing of the lights; remove the additional screws located on both sides of the wheel arches and underneath the bumper. Finally, remove the rear bumper completely!

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly and replacement of the rear bumper of the Ford Focus.
Disassembly and replacement of the rear bumper of the Ford Focus.
Ford Focus (2018-2025 / MK 4) Today we will discover the guide and instructions on how to disassemble and replace the rear bumper of the Ford Focus. First, we open the rear trunk …
How to Remove the Rear Bumper on a Ford Focus MK2
How to Remove the Rear Bumper on a Ford Focus MK2
Ford Focus (2004-2011 / MK 2, Focus 2) In this video, we will see how to remove the rear bumper from a second-generation Ford Focus, following the instructions below. First, open the boot …
How to Remove the Rear Bumper on the Ford Focus
How to Remove the Rear Bumper on the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) To remove the rear bumper on the Ford Focus, open the rear hatch of the car to access the screws that secure the piece from its upper side. Once thes…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos