Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Rear Bumper of the Ford Focus

Model: Ford Focus MK 4 - Years 2018-2025
Part: Rear bumper

Follow this guide to remove the rear bumper of the Ford Focus, using the instructions below. First, open the boot and start by unscrewing the screws found on both sides of the rear wheel arches to detach the bumper at the sides; use a socket spanner and a Torx key to unscrew the additional screws located underneath the bumper, as shown in the video. At this point, detach and completely remove the rear bumper; now refit everything by applying the reverse procedure!

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Focus (2011-2018 / MK 3) Replacing the rear bumper on a Ford Focus if damaged or if you need to remove something inside. Open and lift the tailgate, then use a screwdriver or…
Ford Focus (1998-2004 / MK 1) Removing the front bumper of the Ford Focus? Follow this guide to remove the bumper. Release and lift the bonnet and secure it. Unscrew the securing …
Ford Focus (1998-2004 / MK 1) Replacing the damaged bumper mounted at the rear of a Ford Focus? Here’s how to remove it. Open the tailgate and detach the seal from the edge of the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos