Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the rear bumper of the Ford Focus 2

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Rear bumper

To remove the rear bumper of the Ford Focus, start by unscrewing the two Torx screws found at the bottom inside the two wheel arches. Open the rear hatch and unscrew the two bolts on the sides of the lower edge of the compartment. Proceed to unscrew the cross screws found on the lower edge of the bumper, release the side bumpers to access a 10mm bolt that we will unscrew using a socket wrench on the outer side and an English wrench on the inside to hold the nut, an operation that we must also repeat on the other side. Now we can release the bumper and remove it.

Posted on 6 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Bumper of the Ford Focus
Removing the Rear Bumper of the Ford Focus
Ford Focus (2018-2025 / MK 4) Follow this guide to remove the rear bumper of the Ford Focus, using the instructions below. First, open the boot and start by unscrewing the screws …
Removing the Rear Bumper on a Ford Focus
Removing the Rear Bumper on a Ford Focus
Ford Focus (1998-2004 / MK 1) This tutorial shows you how to replace the rear bumper on a Ford Focus. Open the boot and remove the plastic clips located at the top of the bumper. …
How to Remove the Front Bumper from a Ford Focus
How to Remove the Front Bumper from a Ford Focus
Ford Focus (1998-2004 / MK 1) Before you start, open the bonnet of your Ford Focus. Begin by unscrewing and removing the screws and bolts located around the perimeter of the bumpe…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos