Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bumper of a Ford Focus MK2

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Rear bumper

See other generations:
Video tutorial

Start the operation by opening the rear boot of the vehicle and removing the two securing nuts at the sides of the bumper with a 7mm spanner; next, using a Torx spanner, remove the two screws from the panel inside the wheel arches, then remove another two securing nuts (one for each wheel arch) with a 10mm spanner.

Once done, using a Torx spanner again, remove the screws located under the bumper to detach it, finally disconnect the connectors at the back of the bumper to remove it completely as shown in the video and complete the job.


Updated on 6 October 2026 by ScegliAuto


Related tutorials

Removing and Replacing the Rear Bumper on the Ford Focus
Removing and Replacing the Rear Bumper on the Ford Focus
Ford Focus (2018-2025 / MK 4) Today, we will discover the guide and instructions on how to remove and replace the rear bumper on the Ford Focus. First, open the boot lid and start…
Disassembly of the rear bumper of the Ford Focus 2
Disassembly of the rear bumper of the Ford Focus 2
Ford Focus (2004-2011 / MK 2, Focus 2) To remove the rear bumper of the Ford Focus, start by unscrewing the two Torx screws found at the bottom inside the two wheel arches. Open the rear h…
How do you remove the rear tail light of the Ford Focus?
How do you remove the rear tail light of the Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) Removing the headlight of a car does not necessarily mean having to replace it, there are those who carry out embellishment and customization works, …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos