Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly and replacement of the rear bumper of the Ford Focus.

Model: Ford Focus MK 4 - Years 2018-2025
Part: Rear bumper

Today we will discover the guide and instructions on how to disassemble and replace the rear bumper of the Ford Focus. First, we open the rear trunk door and start removing the rear lights, unscrewing the fixing screws and disconnecting the electrical connector of the lights; then we unscrew the screws found under the bumper and on both sides of the rear wheel arches, as shown in the video. At this point, we gently release the bumper on the sides until it is completely removed, then install the new rear bumper!

Posted on 21 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Bumper on Ford Focus
Ford Focus (2011-2018 / MK 3) Replacing the rear bumper on a Ford Focus if damaged or if you need to remove something inside. Open and lift the tailgate, then use a screwdriver or…
Removing the Rear Bumper of the Ford Focus
Removing the Rear Bumper of the Ford Focus
Ford Focus (2018-2025 / MK 4) Follow this guide to remove the rear bumper of the Ford Focus, using the instructions below. First, open the boot and start by unscrewing the screws …
Removing the Rear Bumper on a Ford Focus
Removing the Rear Bumper on a Ford Focus
Ford Focus (1998-2004 / MK 1) This tutorial shows you how to replace the rear bumper on a Ford Focus. Open the boot and remove the plastic clips located at the top of the bumper. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos