Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Focus
  6. : Removing the front bumper of a Ford Focus

Ford Focus - Video tutorial

Model: Ford Focus MK 1 - Years 1998-2004
Part: Front bumper
Operation: Removing the front bumper of a Ford Focus

Removing the front bumper of the Ford Focus? We disassemble the bumper following the guide. We unhook and lift the bonnet and put it in safety. We unscrew the fastening screws placed in the upper part of the bumper, remove the screws placed in the stone guards and the screws placed in the lower part of the bumper. We remove the bumper from the car body by hand. To proceed with the assembly: let's fix the bumper on the car body with our hands and proceed to tighten all the screws both around the stone guard and around its perimeter. We disconnect the electrical terminals of the fog lights if they are provided on the bumper.


Posted on 13 December 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos