Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper on a Ford Focus MK2

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Rear bumper

See other generations:
Video tutorial

In this video, we will see how to remove the rear bumper from a second-generation Ford Focus, following the instructions below. First, open the boot lid and unscrew the fastening screws located at the corners of the bumper; then, using a T30 Torx socket, unscrew the fastening screws found on both sides of the wheel arches.

Next, unscrew the additional screws located under the rear bumper and disconnect the fog light connector, as shown in the video. All that’s left is to remove the bumper!


Updated on 5 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper on the Ford Focus
How to Remove the Rear Bumper on the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) To remove the rear bumper on the Ford Focus, open the rear hatch of the car to access the screws that secure the piece from its upper side. Once thes…
Removing and Replacing the Rear Bumper on the Ford Focus
Removing and Replacing the Rear Bumper on the Ford Focus
Ford Focus (2018-2025 / MK 4) Today, we will discover the guide and instructions on how to remove and replace the rear bumper on the Ford Focus. First, open the boot lid and start…
Removing the Rear Bumper on a Ford Focus
Removing the Rear Bumper on a Ford Focus
Ford Focus (1998-2004 / MK 1) This tutorial shows you how to replace the rear bumper on a Ford Focus. Open the boot and remove the plastic clips located at the top of the bumper. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos