Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bumper on a Ford Focus

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Rear bumper

See other generations:
Video tutorial

This tutorial shows you how to replace the rear bumper on a Ford Focus. Open the boot and remove the plastic clips located at the top of the bumper.

Next, work in the rear wheel arches by unscrewing the Torx screws and the 10 mm bolts present. Now, get underneath the rear bumper (lift the vehicle if this makes it easier) and remove the plastic clips on this side as well.

Detach the bumper by pulling it by hand and extracting it from its position gradually. Reverse the process for reassembly.


Updated on 17 May 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper from a Ford Focus
How to Remove the Front Bumper from a Ford Focus
Ford Focus (1998-2004 / MK 1) Before you start, open the bonnet of your Ford Focus. Begin by unscrewing and removing the screws and bolts located around the perimeter of the bumpe…
Removing and Replacing the Rear Bumper on the Ford Focus
Removing and Replacing the Rear Bumper on the Ford Focus
Ford Focus (2018-2025 / MK 4) Today, we will discover the guide and instructions on how to remove and replace the rear bumper on the Ford Focus. First, open the boot lid and start…
Removing the Rear Bumper of the Ford Focus
Removing the Rear Bumper of the Ford Focus
Ford Focus (2018-2025 / MK 4) Follow this guide to remove the rear bumper of the Ford Focus, using the instructions below. First, open the boot and start by unscrewing the screws …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos