Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Fog Light Bulb on the Ford Focus

Model: Ford Focus MK 1 - Years 1998-2004
Part: Fog lights

In this brief and simple guide, learn how to remove and replace the rear fog light bulb on the Ford Focus by following the instructions below. First, move to the rear of your car and start by removing the light unit, unclipping it from the sides; then disconnect the electrical connector of the bulb from the light unit, removing it along with the bulb holder, as shown in the video. At this point, replace the bulb with the new one that has the same fitting; all that’s left is to reattach the bulb holder to the light unit, securing everything back in place.

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Fog Light Bulb on a Ford Focus MK3
How to Replace the Front Fog Light Bulb on a Ford Focus MK3
Ford Focus (2011-2018 / MK 3) Discover in this video how to remove and replace the front fog light bulb on the third series Ford Focus by following these simple steps. First, remo…
Replacing the Rear Fog Light Bulb
Replacing the Rear Fog Light Bulb
Ford Focus (1998-2004 / MK 1) To replace the bulb of the rear fog light located at the bottom of the bumper, it is necessary to remove it from its housing: along the lower edge of…
How to Replace the Front Headlight Bulb on a Ford Focus?
How to Replace the Front Headlight Bulb on a Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the front headlight bulb on a Ford Focus, turn off the vehicle and open the bonnet to access the rear of the headlight unit. Locate the ru…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos