Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Fog Light Bulb on a Ford Focus MK3

Model: Ford Focus MK 3 - Years 2011-2018
Part: Fog lights

Discover in this video how to remove and replace the front fog light bulb on the third series Ford Focus by following these simple steps. First, remove the plastic panel or shield located under the front bumper by unscrewing the screws with a Torx screwdriver; then disconnect the cable and the bulb holder from the fog light, along with the bulb, as shown in the video. At this point, remove and replace the bulb with a new one of the correct type; insert it properly and reassemble everything!

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Rear Fog Light Bulb on the Ford Focus
How to Change the Rear Fog Light Bulb on the Ford Focus
Ford Focus (1998-2004 / MK 1) In this brief and simple guide, learn how to remove and replace the rear fog light bulb on the Ford Focus by following the instructions below. First,…
How to Replace the Front Light Bulb on the Ford Focus?
How to Replace the Front Light Bulb on the Ford Focus?
Ford Focus (2011-2018 / MK 3) To replace the front light bulb on the Ford Focus, open the bonnet and loosen the two screws that secure the light at the top. Once these screws are …
How to Replace the Front Headlight Bulb on the Ford Focus MK3
How to Replace the Front Headlight Bulb on the Ford Focus MK3
Ford Focus (2011-2018 / MK 3) Discover in this guide how to remove and replace the front headlight bulb on the Ford Focus third series, from 2014, by following these simple steps.…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos