Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling Front Fog Light on Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Fog lights

In this video tutorial, you will learn how to remove the front fog light from a third-generation Ford Focus. First, obtain the new replacement part and open the bonnet to remove all the clips found above the bumper; now unscrew its screws with a Torx key and also the screws of the headlight support brackets: remove the latter by disconnecting the electrical connectors. At this point, remove the lower screws of the bumper and unclip it, taking it off the car; disconnect the fog light's electrical connector and remove it, replacing it with the new one.

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Rear Fog Light Bulb on the Ford Focus
How to Change the Rear Fog Light Bulb on the Ford Focus
Ford Focus (1998-2004 / MK 1) In this brief and simple guide, learn how to remove and replace the rear fog light bulb on the Ford Focus by following the instructions below. First,…
How to Remove the Fog Light of a Ford Focus
How to Remove the Fog Light of a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Let's see how to remove the fog light along with its bulb from a Ford Focus. Prepare to remove the side fog light located in the bumper. Use the appr…
Removing Front Headlamp from Ford Focus
Removing Front Headlamp from Ford Focus
Ford Focus (1998-2004 / MK 1) In this simple video tutorial, you will learn how to remove the front headlamp from a Ford Focus. Open the car's bonnet and unscrew the screws of the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos