Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the auxiliary belt on a Ford Focus

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, you will learn how to replace the auxiliary belt on the first series Ford Focus (this tutorial also applies to the second series Focus and the first series C-Max). Gather a 15mm spanner and you can begin the work. Lift the car on a ramp and locate the auxiliary belt, then pull it sideways using the spanner and remove it. Remember to check the condition of the pulleys.

Now replace it with the new one and lower the car, ensuring the belt is correctly tensioned. Start the engine for a few minutes and the job is done.


Updated on 29 May 2026 by ScegliAuto


Related tutorials

How to Replace the Alternator Belt on the Ford Focus 3 1.6 TDCI
How to Replace the Alternator Belt on the Ford Focus 3 1.6 TDCI
Ford Focus (2011-2018 / MK 3) In this guide, discover how to remove and replace the auxiliary or alternator belt on the third-generation Ford Focus with a 1.6 TDCI engine. First, …
How to Change the Timing Belt on a Ford Focus
How to Change the Timing Belt on a Ford Focus
Ford Focus (1998-2004 / MK 1) To replace the timing belt on a 2004 first-generation Ford Focus, position the vehicle on a flat surface, disconnect the battery, and lift the front …
How to Replace the Timing Belt on the Ford Focus 1.6 tdCi?
How to Replace the Timing Belt on the Ford Focus 1.6 tdCi?
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the timing belt on the Ford Focus 1.6 tdCi, open the bonnet to access the engine bay. First, loosen all the screws securing the upper cove…

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos