Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear speakers in the Ford Focus?

Model: Ford Focus MK 3 - Years 2011-2018
Part: Speaker

In this tutorial we can see how to replace the rear speakers in the Ford Focus, very simple operation. To do this, we will first have to remove the door panel. We start by unscrewing the screw located inside the opening handle, then remove the cover of the support handle and unscrew the two internal screws with a Torx T20 wrench. We then remove the window lifter control lever, grab the panel and disengage it from the door. Once the lock cord has been disconnected, we can unscrew the speaker fixing screws with a Torx T25 wrench and an 8mm socket.

Posted on 19 June 2022 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble and remove the front door speakers in a Ford Focus
How to disassemble and remove the front door speakers in a Ford Focus
Ford Focus (2004-2011 / Focus 2, MK 2) This video will show you how to disassemble and remove the speakers located in the front door of your Ford Focus. First of all, you have to disassemb…
How to replace the front speakers of the Ford Focus.
How to replace the front speakers of the Ford Focus.
Ford Focus (2004-2011 / Focus 2, MK 2) In this short and simple guide, we will see how to disassemble and replace the front speakers of the Ford Focus, following the instructions below. Fi…
How to change Ford Focus speakers
How to change Ford Focus speakers
Ford Focus (2011-2018 / MK 3) Let's see today the steps on how to disassemble and replace the Ford Focus speakers, following the instructions below. First we open the front door a…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500X

Learn how to equip your car with universal roof bars. Universal roof bars are used on cars with and without roof rails (fixed bars secured to the car roof). Install the roof bar kit as shown in the video with the bars calibrated according to the width of the car. Position the brackets at both ends of the doors on the car's original roof rails. Once the width of the anchoring brackets is adjusted, tighten the bolts with the butterfly nut (if a lock is present) until fully secured to the roof rails. Finally, apply the safety caps on your Fiat.

Watch the video!


by ScegliAuto

More videos