|
Do it yourself
| |||
| ||||
How to reset the service light on a Ford Fiesta
Model: Ford Fiesta
Fiesta 6, MK 6, MK VI
- Years 2008-2017
In this short video tutorial we can see how to reset the maintenance warning light on a Ford Fiesta, model produced from 2008 to 2017. First of all we have to make sure that all the car doors are closed, then we turn on the instrument panel but without putting motorcycle the vehicle. Once this is done, the reset is very simple, it will be enough to hold down the brake and accelerator pedals at the same time for about fifteen seconds, when the reset has been carried out the maintenance warning light will go off or the item "Reset performed on the display. Now will appear. we just have to turn the car off and on again to check the reset.
Posted on 4 August 2022 by ScegliAuto
Video tutorial
Related tutorials
Ford Fiesta
(2017-2023 /
MK VII, Fiesta 7, MK 7)
Let's discover the instructions on how to reset the service maintenance light for the routine oil change of the Ford Fiesta. First, we get into the c…
Ford Fiesta
(2017-2023 /
MK VII, Fiesta 7, MK 7)
Today we will explain how to reset the service light on a Ford vehicle in a simple, fast, and above all autonomous way. The steps to reset the servic…
Ford Fiesta
(2008-2017 /
Fiesta 6, MK 6, MK VI)
The following video demonstrates how the service light can be reset for a Ford Fiesta. As a first step, go to the driver's seat and make sure you hav…
Other guides you may be interested in
|
Reset Tyre Pressure Light Toyota Yaris 2016
Due to advancements in onboard electronics, many vehicles are equipped with various sensors that monitor several operating parameters, including tyre pressure. Even if the pressure is correct, the warning light may sometimes illuminate on the dashboard. First, check with a gauge that the pressure in all 4 tyres matches the manufacturer's specifications. For the 2016 Toyota Yaris, the values are as follows: Front: 2.2 bar for T-type tyres, 2.3 for H-type, 2.4 for W-type. Rear: 2.2 bar for all tyre types. To reset the pressure light, turn on the ignition with the key, locate the reset button under the steering column. Press it for 3 seconds, and the light will flash 3 times before turning off. Remove the key from the ignition and start the vehicle. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.054
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
