Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Transit
    4. : How to replace the headlight bulb on Ford Transit 7

Ford Transit - Video tutorial

Model: Ford Transit MK 7 - Years 2006-2014
Part: Headlight bulb
Operation: How to replace the headlight bulb on Ford Transit 7

Below we will find out together how to correctly replace the headlight bulb of your Ford Transit Mk7. Before starting, we remind you that the entire operation must necessarily be carried out with the vehicle off and safely parked. Then go to the front of the Ford Transit and raise the front hood all the way. Position yourself in correspondence with the lighthouse and unscrew the two screws that hold it in place. At this point, disassemble the headlight, remove the protective cap located behind the bulb and finally proceed with the replacement of the latter.


Posted on 5 August 2022 by ScegliAuto



How to replace the headlight bulb on Ford Transit?
Ford Transit (2014-2023 / MK 8) In order to replace the Ford Transit headlight bulb, the hood must be opened so that the rear part of the headlight corresponding to the bulb to be r
How to replace the Ford Transit headlight bulb?
Ford Transit (2014-2023 / MK 8) In order to replace the Ford Transit headlight bulb, you need to open the hood, so that you can access the upper part of the headlight, loosening the
How to replace the Ford Transit headlight bulb
Ford Transit (2014-2023 / MK 8) Before discovering together how to replace the Ford Transit headlight bulb, make sure you have turned off the engine and above all that you have disc

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos