Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb of the Ford Fiesta?

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Headlight bulb

To replace the front headlight bulb of the Ford Fiesta, open the bonnet to access the headlight mounting screws located at the top and bottom. Once the screws are removed, you can pull the headlight from its housing and disconnect the connector at the back. By removing the rear plastic cover, you can pull the bulb from its housing, replacing it with a new part. After replacement, reinsert the headlight, securing it with the screws and reconnecting it to the connector.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlamp Bulb on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this video tutorial, you will see how to replace the headlamp bulb on a Ford Fiesta by following a few simple steps that will allow you to work in…
How to replace the front headlight bulb of the Ford Fiesta
How to replace the front headlight bulb of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Replacing the right front headlight bulb of the Ford Fiesta is a simple operation that can be done independently. To replace the bulb, we must: - ope…
How to Change the Bulb on the Front Headlight of a Ford Fiesta
How to Change the Bulb on the Front Headlight of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To change the damaged bulb on the front headlight of a Ford Fiesta, follow this video carefully. Open the front bonnet and secure it with the prop ro…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos