Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on the Ford Fiesta 6

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Headlight bulb

If you are wondering how to correctly and independently replace the front headlamp bulb on your Ford Fiesta Mk6, just read this guide carefully and follow the instructions. First, switch off the car and lift the bonnet to access the engine bay. Locate the headlamp that needs replacing and remove the cover situated at the rear of the headlamp. Finally, take out the bulb holder and proceed to replace the bulb. Refit the cover and you are done.

Updated on 19 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Install the LED Bulb in the Front Headlamp of the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To install the LED bulb in the front headlamp of the Ford Fiesta, open the bonnet and loosen the two screws securing the headlamp at the top. This wi…
How to Replace the Front Headlamp Bulb on a Ford Fiesta?
How to Replace the Front Headlamp Bulb on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the front headlamp bulb on a Ford Fiesta, start by opening the bonnet and locating the headlamp you wish to work on. Once identified, look…
Position Bulb Replacement for Front Headlamp on Ford Fiesta
Position Bulb Replacement for Front Headlamp on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In today's video, you will learn how to remove and replace the position bulb of the front headlamp on a Ford Fiesta from 2008 to 2017. First, open th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos