Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change a Battery in a 2020 Ford Fiesta Key

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Key

As shown in the video, changing the battery in the central locking key of the 2020 Ford Fiesta is very simple. Purchase the replacement battery from any supermarket or store that sells batteries. You will need a flat round CR 2032 battery. Use a small knife or flat screwdriver to pry open the battery compartment of the key as demonstrated in the video. Once opened, remove the old battery and replace it with a new one. Insert the new battery into the housing, ensuring the polarity is correct, and close it up.

Updated on 10 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Change the Key Battery of the Ford Fiesta
How to Change the Key Battery of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Replacing the battery inside your Ford Fiesta key is very simple. To complete the operation, just read the following guide and apply the described pr…
How to Change the Key Battery on a Ford Fiesta
How to Change the Key Battery on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Let's see how to change the battery on a Ford Fiesta key if it is flat. Take your remote key and, using a screwdriver, open the plastic covers: pry w…
Change Key Battery on Fiesta
Change Key Battery on Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) How to change the battery of a Ford Fiesta key? Start by prising apart the two halves of the remote key using a screwdriver. Once separated, locate t…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - What does the yellow wrench light on the Ford Fiesta mean? Read answer
    • Fiesta 2008-2017 - What does the wrench light on my Ford Fiesta mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos