Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Start&Stop Function on the Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Checks and maintenance

In today's tutorial, you will learn how to reset and restore the Start&Stop function on the Ford Focus by following these simple and quick steps. First, open the bonnet of your car and disconnect the negative terminal of the battery to reset the vehicle's ECU. Then, get inside the vehicle and turn on the ignition by pressing the rear fog light switch five times, as shown in the video. Now, press the hazard light button three times to reset the warning light.

Updated on 14 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How do you deactivate the Start&Stop of the Ford Focus?
Ford Focus (2011-2018 / MK 3) In order to deactivate the Start&Stop system of the Ford Focus, you need to insert the ignition key into the ignition switch, so that you can turn on…
How do you permanently deactivate the start-stop system in the Ford Focus?
How do you permanently deactivate the start-stop system in the Ford Focus?
Ford Focus (2018-2025 / MK 4) The start and stop device, designed to reduce car pollution, automatically turns off the engine when the vehicle stops and restarts it when it starts…
How to activate and deactivate the Start&Stop system of the Ford Focus
How to activate and deactivate the Start&Stop system of the Ford Focus
Ford Focus (2011-2018 / MK 3) The instructions in this guide will show us how to activate and deactivate the Start&Stop system of the Ford Focus, in simple steps. First, we get on…

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 2004-2011 - Where is the outside temperature sensor of a Ford Focus located? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos