Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you permanently deactivate the start-stop system in the Ford Focus?

Model: Ford Focus MK 4 - Years 2018-2025
Part: Checks and maintenance

The start and stop device, designed to reduce car pollution, automatically turns off the engine when the vehicle stops and restarts it when it starts again. If the user decides, as shown in this video, to deactivate it permanently instead of temporarily, they can connect to the vehicle's OBD socket with a PC and connect to the control unit, provided they have the necessary software, otherwise they will have to go to a workshop. All very simple, after the aforementioned connection, you search for the car model, select the start and stop feature, and disable it.

Posted on 9 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Activate the Start&Stop on a Ford Focus?
How to Activate the Start&Stop on a Ford Focus?
Ford Focus (2011-2018 / MK 3) To activate the Start&Stop on a Ford Focus, turn on the instrument panel and use the button located on the centre console next to the gear lever. Pre…
How do you deactivate the Start&Stop of the Ford Focus?
Ford Focus (2011-2018 / MK 3) In order to deactivate the Start&Stop system of the Ford Focus, you need to insert the ignition key into the ignition switch, so that you can turn on…
How to disable the START & STOP on the Ford Focus at startup.
How to disable the START & STOP on the Ford Focus at startup.
Ford Focus (2018-2025 / MK 4) In this video tutorial, you can see how to disable the Start & Stop feature on the Ford Focus at startup, following a few simple steps that will guid…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 2004-2011 - Where is the outside temperature sensor of a Ford Focus located? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos