Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windshield Wiper Blades on a Ford Escape?

Model: Ford Escape MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Windshield wipers

See other generations:
Video tutorial

To replace the windshield wiper blades on a Ford Escape, lift the arm connected to the blades so that they are not in direct contact with the windshield. At this point, you can open the locking clip that connects the blade to the arm, allowing you to slide the old blade off and replace it with a new one. After removal, perform the same operation on the other side, installing both blades.

Once installed, position them on the windshield and check that they function correctly.


Updated on 16 June 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in the Ford Escape
How to Replace the Battery in the Ford Escape
Ford Escape (2013-2019 / MK 3) In this tutorial, you will see how to replace the battery in the Ford Escape, a very simple and quick operation. First, ensure that the key is not in…
How to Replace a Broken Bracket on the Driver's Door of a 2020 Ford Escape
How to Replace a Broken Bracket on the Driver's Door of a 2020 Ford Escape
Ford Escape (2020-2026 / MK 4) As mentioned in the video, if your 2020 Ford Escape is still under warranty, it's better not to do this DIY job and take it to a shop where they will…
How to Replace the Cabin Air Filter of the Ford Escape
How to Replace the Cabin Air Filter of the Ford Escape
Ford Escape (2013-2019 / MK 3) Unlike many other car models, in the Ford Escape, the cabin air filter is not located inside the passenger glove compartment but in the engine compar…

Where to Find the Fuses of the Citroen C3

The fuse box of the Citroen C3 in the engine compartment is located behind the battery near the headlamp; to access the fuses, remove the cover by moving the side tabs. The fuse box in the cabin is situated at the bottom of the dashboard, above the pedals; to access the fuses, simply remove a small cover (where applicable). To replace a fuse, use small pliers to grasp the fuse to be changed and pull it out; if the bridge inside the fuse is broken, the fuse needs to be replaced; otherwise, the fuse is functioning. If the fuse needs to be replaced, use one with the same amperage to avoid malfunctions.

Watch the video!


by ScegliAuto

More videos