Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a 2015 Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tire pressure warning light

See other generations:
Video tutorial

You can reset the tyre pressure light on a 2015 Ford Fiesta using the radio display and the buttons below it. Start by pressing the "menu" button located on the central dashboard, then navigate to "vehicle settings" using the down arrow button. Select the option by pressing the "ok" button and repeat the same for the "tyre monitor" option.

Once here, press and hold the "ok" button for at least two seconds, then release it and press it again to confirm your intention to reset the light.


Updated on 18 June 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on the Ford Fiesta?
How to Reset the Tyre Pressure Light on the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To reset the tyre pressure light on the Ford Fiesta, turn on the ignition by rotating the key in the ignition switch: once the dashboard is on, selec…
How to Reset the Tyre Pressure Light on the Ford Fiesta?
How to Reset the Tyre Pressure Light on the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this tutorial, you will see how to reset the tyre pressure light on the Ford Fiesta, a very simple and quick operation that should only be perform…
Resetting the Tyre Pressure Light on a Ford Fiesta
Resetting the Tyre Pressure Light on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) This guide briefly outlines the steps needed to reset the tyre pressure light on a Ford Fiesta; before performing the reset, ensure all four tyres ar…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos