Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from the Ford Focus?

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Car stereo

See other generations:
Video tutorial

Removing the radio from the Ford Focus MK2 is a straightforward and quick operation. First, ensure that the key is not inserted.

Start by gripping the frame from the bottom edge, then pull it firmly towards you to disengage it from the centre console. Next, unscrew the four screws located at the corners with a Torx T25 screwdriver, grasp the radio, and pull it out of its housing.

At this point, disconnect the rear connectors and install the replacement by simply following the reverse procedure.


Updated on 21 June 2026 by ScegliAuto


Related tutorials

Removing the Original Stereo from a Ford Focus
Removing the Original Stereo from a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Want to remove the original stereo from a Ford Focus? Here’s how to proceed with the correct removal: remove the trim around the stereo using a plast…
How to Remove the Standard Radio from the Ford Focus
How to Remove the Standard Radio from the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today, we will see the instructions that will allow you to remove and replace the standard radio from the Ford Focus in simple and quick steps. First…
How to Unlock the Radio on a 2006 Ford Focus
How to Unlock the Radio on a 2006 Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) When the radio on the 2006 Ford Focus locks due to a battery replacement or a blown fuse, you need to enter the radio unlock code to make it work aga…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos