Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery of the Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Key

In today's video, see how to disassemble the key fob of the Ford Kuga (or other models from the American manufacturer) to replace the battery. The unit in question is a CR 2032 3V. First, remove the metal blade from the key, as it is a keyless remote. Next, detach the two parts that make it up and then extract the battery from its housing. Once done, replace it with a new one of the same type and proceed to test the remote. If it works correctly, close it following the steps completed earlier.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery in the Ford Kuga?
How to Replace the Remote Battery in the Ford Kuga?
Ford Kuga (2008-2012 / C394, MK 1) As seen in this tutorial, replacing the remote battery in the Ford Kuga is an extremely simple and quick operation. You will need a replacement CR203…
How to Replace the Remote Battery for a Ford Kuga
How to Replace the Remote Battery for a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) This guide shows how to replace the remote battery for the 2014 Ford Kuga. The first step is to open the compartment where the physical key is stored…
How to Replace the Remote Battery for a Ford Kuga
How to Replace the Remote Battery for a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) In the video description, you will see how to replace the dead battery in the remote for a Ford Kuga. If possible, simply open the remote casing at t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos