Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on the Ford Focus?

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tire pressure warning light

See other generations:
Video tutorial

As shown in this tutorial, resetting the tyre warning light on the Ford Focus is an extremely simple and quick operation. This procedure should only be performed after restoring the correct pressure in each tyre according to the instructions in the manual.

Start by turning on the instrument cluster, then scroll the display screens to the left to reach the general menu, enter "Settings" and then "Driver assist". At this point, select the "Tyre monitor" option and, as indicated on the display, press and hold the "OK" button to perform the reset.


Updated on 22 June 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on a Ford Focus?
How to Reset the Tyre Pressure Light on a Ford Focus?
Ford Focus (2018-2025 / MK 4) You can completely clear the tyre pressure light on a Ford Focus by inflating the tyres until they reach the optimal pressure value: this will be ind…
How to Reset the Tyre Pressure Warning Light on a Ford Focus mk3
How to Reset the Tyre Pressure Warning Light on a Ford Focus mk3
Ford Focus (2011-2018 / MK 3) This guide shows how to reset the tyre pressure warning light on a Ford Focus mk3. No tools or specialist knowledge are required for this operation. …
How to Reset the Tyre Pressure Warning Light on the Ford Focus
Ford Focus (2011-2018 / MK 3) Today, discover the procedure to reset the tyre pressure warning light on the Ford Focus. Before resetting, ensure all four tyres are at the correct …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos