Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Rear Headlamp Bulb

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Tail light

See other generations:
Video tutorial

To replace the bulb in the rear headlamp, you need to remove the headlamp itself: first, open the rear boot and unscrew the fixing screws of the headlamp located along the internal closure line; disconnect the headlamp considering it has a pressure pin; once the headlamp is disconnected, you can access the bulb holder which can be removed by turning it 90 degrees anti-clockwise, allowing you to replace the bulbs (bayonet fitting); ensure the bulbs are functioning correctly and then reverse the process by positioning the bulb holders and then the headlamp back in their respective places.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Replacement of Rear Brake Light Bulb
Replacement of Rear Brake Light Bulb
Ford Focus (1998-2004 / MK 1) To replace the rear brake light bulb, you need to remove the light unit: open the boot and unscrew the three plastic nuts that secure the light to th…
How to Replace the Rear Light Bulb on a Ford Focus
How to Replace the Rear Light Bulb on a Ford Focus
Ford Focus (1998-2004 / MK 1) Before you begin, open the boot of your Ford Focus. Start by unscrewing the screws securing the rear light. Next, pull the light out of its housing. …
How to replace the rear headlight bulb of the Ford Focus
How to replace the rear headlight bulb of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today we will explain how to replace the rear headlight bulb of the Ford Focus. First, open the trunk of the vehicle and then unscrew the screw that …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos