Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Start&Stop System on a Ford Fiesta 1.0L Ecoboost 2013

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Starter motor

This guide explains the procedure to reset the Start & Stop system for the 2013 Ford Fiesta 1.0L Ecoboost. Follow these steps: 1. Press the engine start button once and wait for about 10 seconds; 2. After waiting, press the fog light button five times; 3. Immediately after, press the hazard warning triangle or four-way indicator three times; 4. At this point, after a few seconds, the battery indicator on the instrument cluster will start to flash; 5. If what is described in step 4 occurs, only then press the start button once, and finally, press the hazard warning triangle or four-way indicator once. If the previous steps have been followed correctly, you will have successfully reset your Start & Stop system on your Ford Fiesta!

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Disable Start&Stop in the Ford Fiesta?
How to Disable Start&Stop in the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this short video, see how to disable the Start&Stop system in the Ford Fiesta. Start&Stop is the system that allows the automatic shutdown of the …
How to permanently deactivate the START&STOP system of the Ford Fiesta
How to permanently deactivate the START&STOP system of the Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) For some drivers, the START&STOP system is considered a hindrance and for this reason they tend to deactivate it even temporarily. Today we will expl…
How to Replace the Battery in a Ford Fiesta 1.0 Ecoboost
How to Replace the Battery in a Ford Fiesta 1.0 Ecoboost
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Briefly, we will discover the instructions that will allow us to dismantle and replace the battery in a Ford Fiesta 1.0 Ecoboost. First, open the bon…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos