Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heater Radiator on a Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Heater core

To replace the heater radiator on the Ford Focus, open the glove compartment on the passenger side to access the internal screws: by loosening these screws, you can completely detach the glove compartment, then loosen all the side panels to the left of the footwell. This will allow access to the heater radiator, which must be freed from its housing by unscrewing the fixing screws and disconnecting the pipes; at this point, you can remove the old radiator and replace it with a new one.

Updated on 5 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Cabin Heater Radiator on a Ford Focus
Guide to Replacing the Cabin Heater Radiator on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today, we will discover how to dismantle and replace the cabin heater radiator on a Ford Focus. First, get inside the cabin and start removing the en…
Guide to replace the heater radiator on the Ford Focus Mk1
Guide to replace the heater radiator on the Ford Focus Mk1
Ford Focus (1998-2004 / MK 1) This guide outlines the main procedure to remove and replace the heater radiator in the first series Ford Focus. First, get inside the vehicle and st…
How to Replace the Air Conditioning Radiator on a Ford Focus MK3
How to Replace the Air Conditioning Radiator on a Ford Focus MK3
Ford Focus (2011-2018 / MK 3) In this video, we will see the main steps to remove and replace the heater radiator of the Ford Focus MK3 in simple steps. First, get inside the vehi…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - Where is the Ford Focus heating radiator located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos