Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to replace the Ford Focus MK3 air conditioning radiator

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Passenger compartment heating radiator
Operation: How to replace the Ford Focus MK3 air conditioning radiator

In this video we see the main steps to disassemble and replace the passenger compartment heating radiator of the Ford Focus third series, in simple steps. First of all, we get on board the car and disassemble the part of the front dashboard, on the passenger side, disassembling the whole central dashboard and the tunnel; then we find our heating radiator, as shown in the video. At this point we are going to disconnect the coolant pipes, accessing them from the engine compartment, draining all the fluid; then we unscrew the screws of the radiator to remove it, following the video to the end.


Posted on 20 November 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Focus 2004-2011 - Where is the Ford Focus heating radiator located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos