Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replace the heater radiator on the Ford Focus Mk1

Model: Ford Focus MK 1 - Years 1998-2004
Part: Radiator

This guide outlines the main procedure to remove and replace the heater radiator in the first series Ford Focus. First, get inside the vehicle and start by removing part of the dashboard, taking off the plastics found at the bottom on the driver's side; then remove the centre console and unscrew the screws of the side brackets of the gearbox. At this point, you will find the heater radiator inside the dashboard; disconnect the coolant pipes to remove it and replace it with the new one, following the video until the end!

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Ignition Cylinder on the Ford Focus
Guide to Replacing the Ignition Cylinder on the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today's guide will show you how to remove and replace the ignition cylinder on the Ford Focus, following the instructions below. First, get inside th…
Guide to Removing the Fuel Pump from a Ford Focus
Ford Focus (1998-2004 / MK 1) Today's guide will illustrate the main steps for removing and replacing the fuel pump on a Ford Focus. First, open the rear doors and begin removing …
Guide to replacing the front door speaker of the Ford Focus
Guide to replacing the front door speaker of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this guide we will see the instructions that will allow us to disassemble and replace the front door speaker of the Ford Focus. First, we open the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos