Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Cabin Heater Radiator on a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Heater core

Today's guide will show you the main steps to remove and replace the cabin heater radiator on a Ford Focus. First, open the bonnet of your car and start disconnecting the coolant hoses located behind the engine block, draining the fluid into a container. Also, disconnect the electrical connector. Now, get inside the vehicle and remove the plastic panel located at the bottom on the passenger side; disconnect the hoses again and unscrew the radiator bracket screws to remove and replace the entire matrix!

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Heater Radiator on a Ford Focus
How to Replace the Heater Radiator on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the heater radiator on the Ford Focus, open the glove compartment on the passenger side to access the internal screws: by loosening these …
Guide to Removing the Fuel Pump from a Ford Focus
Ford Focus (1998-2004 / MK 1) Today's guide will illustrate the main steps for removing and replacing the fuel pump on a Ford Focus. First, open the rear doors and begin removing …
Guide to replace the heater radiator on the Ford Focus Mk1
Guide to replace the heater radiator on the Ford Focus Mk1
Ford Focus (1998-2004 / MK 1) This guide outlines the main procedure to remove and replace the heater radiator in the first series Ford Focus. First, get inside the vehicle and st…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - Where is the Ford Focus heating radiator located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos