Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How do you replace the lambda sensor on the Ford Focus?

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Lambda sensor
Operation: How do you replace the lambda sensor on the Ford Focus?

In order to replace the lambda probe on the Ford Focus, you need to open the bonnet, so that you can access the components located inside the engine compartment: in the rear part of the engine block, immediately under the windscreen, it will be possible to locate the sensor . The latter must be removed from its seat by loosening it with a special key and disconnecting it from the special cable: in this way it will be possible to insert the new sensor, connecting it to the cable and inserting it in its seat. In this way it will be possible to verify that everything works in the correct way.


Posted on 19 April 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Focus 2011-2018 - How to replace the lambda probe in the Ford Focus 3? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos