Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Focus
  6. : Ford Focus MK3 lambda probe replacement

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Lambda sensor
Operation: Ford Focus MK3 lambda probe replacement

In this video tutorial we will see how to remove and replace the lambda sensor sensor on a third series Ford Focus. We open and lift the bonnet and first of all we go to locate our lambda probe, which we find behind the engine block; then we disconnect the sensor electrical connector and unscrew the probe fixing bolt, using a socket wrench. At this point we definitively remove our lambda probe together with the wiring, as shown in the video: we just have to replace it with the new one and apply the reverse procedure for reassembly!


Posted on 24 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Focus 2011-2018 - How to replace the lambda probe in the Ford Focus 3? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos