Do it yourself
Frequently asked questions about cars and motorcycles

Fitting an External Rear-View Mirror

Model: Ford Focus MK 1 - Years 1998-2004
Part: Side mirror

The following guide shows how to fit a new external rear-view mirror to your car, replacing the old one without spending excessive money. Once you have purchased the new mirror, you can proceed with the replacement. External mirrors can be removed using a screwdriver, inserting the screwdriver between the glass and the outer casing and prying it off. Once this is done, you can proceed with fitting the new mirror. Simply push the new mirror into the bracket, applying pressure in the centre to engage it with the main metal clips that hold the structure.

Updated on 16 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Ford Focus (1998-2004 / MK 1) This guide covers the removal of the external wing mirror on a Focus when it is damaged. Open the car door, remove the control lever of the mirror an…
Ford Focus (2011-2018 / MK 3) Do you want to replace the bulb in the mirror? This task is not difficult; here's how to do it. Adjust the mirror or remove it by prising it off. Rem…
Ford Focus (1998-2004 / MK 1) In today's video tutorial, you will learn how to remove and replace the external wing mirror on a first-generation Ford Focus in simple and quick ste…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos