Do it yourself
Frequently asked questions about cars and motorcycles

How to Open the Key Fob of the Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Key

Here are step-by-step instructions to open the key fob of the Ford Kuga, allowing you to replace the battery and access the electronic board. First, take the key fob in hand and start by removing the physical key from inside it; then lever on the side of the casing to open it into two parts, as shown in the video. At this point, remove and replace the battery with a new one, specifically a CR 2032 3V; then reassemble the key fob and the key!

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Kuga (2012-2019 / C520, MK 2) In this guide, we will see the instructions that will allow us to program the remote control and key of the Ford Kuga. First, we get into the car wit…
Ford Kuga (2012-2019 / C520, MK 2) To replace the battery of the Ford Kuga remote control, detach the cover on the back of the device, then also remove the key blade underneath: once t…
Ford Kuga (2012-2019 / C520, MK 2) Replacing the battery of a Ford Kuga key is a very simple and quick operation to perform independently, also thanks to our short video tutorial. To c…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos