Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Fiesta
  6. : How to replace the brake light on Ford Fiesta

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VI, Fiesta 6, MK 6 - Years 2008-2017
Part: Rear light bulb
Operation: How to replace the brake light on Ford Fiesta

This video tutorial shows the necessary procedure to be able to replace the brake light on the 2013 Ford Fiesta. This video is useful if, as in the video, the stop light bulb burns out and therefore needs to be replaced. To gain access to the bulb, open the trunk and unscrew the visible screws and the one located under the carpet which must be unscrewed by hand. After doing this, remove the headlight and then remove the connectors. At this point you can remove the blown bulb and replace it. After having replaced it, put the headlight back in place by connecting the connectors and then tightening all the screws.


Posted on 11 May 2023 by ScegliAuto



How to replace the third brake light on the Ford Fiesta
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) In today's video we see how to replace the third brake light in the early 2000s Ford Fiesta. First, let's check the user and maintenance manual for w
Disassembly of the third brake light Ford Fiesta
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) In today's video, we will see how to disassemble the third brake light of a Ford Fiesta. The disassembly process is very easy: first, we open the tru
Replacement of the third brake light on a Ford Fiesta
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) In this tutorial today, we will see how to replace the third brake lights of a Ford Fiesta, fifth generation model produced from 2002 to 2005. Let's

    Frequently Asked Questions

    • Fiesta 2008-2017 - Why are the brake lights on Ford Fiesta 6 not working? Read Answer
    • Fiesta 2002-2008 - Why don't the brake lights in the Ford Fiesta work? Read Answer
    • Fiesta 2008-2017 - Why does the Ford Fiesta reverse light not work? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos