Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Camshaft Oil Seal

Model: Ford Fiesta MK V, MK 5, Fiesta 5 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Engine

See other generations:
Video tutorial

To replace the camshaft oil seal, it is necessary to remove the timing belt and the associated toothed pulley; then extract the old oil seal, thoroughly clean the seat, removing any dirt that could compromise the seal of the new oil seal; generously lubricate the seat and the new oil seal with clean oil, insert it with the lip facing inwards and press it in until fully seated; then install the toothed pulley, align the timing marks, and install the timing belt: consider whether it is appropriate to replace it.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) Generously lubricate the new oil seal and its housing with clean oil; align the oil seal to its housing with the lip facing inwards and push it in un…
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) When disassembling the cylinder head and whenever gaskets and oil seals are removed, it is good practice to replace them all during reassembly. Befor…
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) When replacing the camshaft, it is recommended to also install a new so-called pedestal, consisting of the spherical head pins and the valve push rod…

Where are the fuses located on the Renault Laguna?

On the Renault Laguna, the fuses are located inside the fuse boxes installed in the vehicle: in this car model, you will find two boxes for containing the fuses. The first is in the fuse box on the left side of the dashboard, accessible by opening the driver's door: here you will find the fuses for the windscreen wipers, fog lights, horn, etc. The second box is located on the right side of the engine compartment: here you will find the fuses for the dipped headlights, radiator fan, alternator, etc.

Watch the video!


by ScegliAuto

More videos