Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Camshaft Oil Seal

Model: Ford Fiesta Fiesta 4, Be91, MK 4, MK IV - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Engine

See other generations:
Video tutorial

Generously lubricate the new oil seal and its housing with clean oil; align the oil seal to its housing with the lip facing inwards and push it in until fully seated using a suitable tool that allows for insertion without damaging or deforming it. Once the new camshaft oil seal is installed, fit the timing belt pulley, tightening the relevant fixing bolt with a torque wrench.

Subsequently, when completing the installation of the timing belt, ensure the timing marks are correctly aligned.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Replacing the Camshaft Oil Seal
Replacing the Camshaft Oil Seal
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) To replace the camshaft oil seal, it is necessary to remove the timing belt and the associated toothed pulley; then extract the old oil seal, thoroug…
Replacement of the Camshaft Oil Seal
Replacement of the Camshaft Oil Seal
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) When disassembling the cylinder head and whenever gaskets and oil seals are removed, it is good practice to replace them all during reassembly. Befor…
Camshaft Installation Instructions
Camshaft Installation Instructions
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) When replacing the camshaft, it is recommended to also install a new so-called pedestal, consisting of the spherical head pins and the valve push rod…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos