Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Logo on the Trunk of a Ford Figo

Model: Ford Figo MK 2, B562 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Body

See other generations:
Video tutorial

If you want to replace the logo on the trunk of this vehicle because it is worn and no longer legible, you will find instructions in the tutorial video and in the description below. First, use a sharp object to pry off the old logo.

The new logo does not have mounting pins for the body, so you can remove the two pins from the old logo and heat them with a flame to melt the plastic and attach them to the logo. Then, take the new logo and try to insert it into the designated holes in the body.

Before permanently positioning it, you can use glue to improve the final adhesion.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

How to Replace the Third Brake Light Bulb in a Ford Figo?
How to Replace the Third Brake Light Bulb in a Ford Figo?
Ford Figo (2010-2015 / MK 1, B517) As we can see in this tutorial, replacing the third brake light bulb in a Ford Figo is an extremely simple and quick operation. Before proceeding, en…
How to Remove the Rear Headlight of the Ford Figo?
How to Remove the Rear Headlight of the Ford Figo?
Ford Figo (2015-2021 / MK 2, B562) Removing the rear headlight of the Ford Figo is not difficult, and you can do it independently without needing to go to a mechanic. First, open the t…
Where to Find the Fuse Box on a Ford Figo
Ford Figo (2010-2015 / MK 1, B517) In this guide, you will learn how to quickly and safely locate the fuse box on your first-generation Ford Figo. First, turn off the vehicle and allow…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos